Wave Release Technology reduces release force by 60% during the lift cycle compared to standard smooth NFEP films. This leads to faster and more reliable print cycles.
Resin 3D Printer
Anycubic Photon P1 Max
rate_review Be the first to review
NPR
1
alarm
Promo Ends In: 00:00:00
Out of Stock
Quantity
compare_arrows
Compare with Resin 3D Printer
1
Why choose Photon P1 Max?
Wave Release Technology
Full-Scale 18.3L Print Volume
92% Light Uniformity
Precision-Ground Steel Build Plate
Engineered for 8000cps Resin
Intelligent Printing Assistant 3.0
Prints from First Users
Built for Ambition,from Details Up
Next-Level Craftsmanship:Consecutive Successes over 1,000 Print Cycles[1]
Tolerance Down to the Width of a Human Hair
Uniformed Light Exposure
The Source of Consistency:
More Light PrecisionCOB + Aspherical Fresnel Lens
More Uniform Light DistributionFull-screen Rolling Calibration
More Stable Light Output8mm Copper Cooling System
Wave Release Technology
Intelligent Leveling System 3.0, Auto-Leveling the Playing Field
Factory Calibration
Prints right out of the box
Prints right out of the box
Auto-Leveling Self-Check
Automatically performs bed leveling self-check before printing to ensure optimal platform readiness.
Automatically performs bed leveling self-check before printing to ensure optimal platform readiness.
Leveling-Assist
Displays real-time force values at four corners for fine-tuning.
Displays real-time force values at four corners for fine-tuning.
Intelligent Dynamic Adjustment, Fast & Steady Wins the Race
Dynamic Release 3.0
Monitors real-time layer separation forces to modulate the lift height and speed. This ensures reliable release with every layer, significantly boosting both print success rate and quality.
Dynamic Light-Off Compensation 3.0
Calculates resin flow-back rate and dynamically adjusts the light-off duration to precisely prepare each layer for exposure, ensuring optimal speed and efficiency.
Build Plate Installation Inspection, AI Detection
Bottom Layer Separation Inspection, AI Detection
Resin Level Inspection
Residue Inspection
Engineered for Ultra-Viscous 8000cps Resin
Optimal Resin Flow: 1900ml Thermal-Controlled Resin Vat[4]
Featuring a 1.9L ultra-large thermal-controlled vat, this system supports 300mm models in a single print cycle. By actively maintaining a constant resin temperature of up to 35 °C, it ensures optimal viscosity for maximum success rate.
*Heating performance is subject to resin vat capacity and ambient temperature. At ≥5℃ (41°F) ambient, the vat achieves up to 35℃ (95°F). Below this threshold, maximum temperatures may vary.
The All-New Photon Workshop 4.0
Remote OperationIntegrated camera enables remote printing submission and real-time progress monitoring via Anycubic App.
Dual-Network CnnectivityWi-Fi + Ethernet support ensures secure file transfers and full privacy protection with LAN isolation mode.
Makeronline, One of the Biggest Online Model Libraries
- Massive Model Library
- Monetize Your Designs
- Global Knowledge Exchange
- AC Wiki Troubleshooting Expert
Technical Specifications
Detailed hardware & material parameters
| Item | Specification | |
|---|---|---|
| General | Brand | ANYCUBIC |
| Category | Resin 3D Printer | |
| Core Printing Performance | Printing Volume | 285.5*214*300mm³ |
| Printing Speed | 15-25 mm/h (0.05 mm layer, Std Resin) | |
| Layer Height Range | 0.02-0.15 mm | |
| X/Y Axis Resolution | 24.8 × 24.8 μm | |
| Light Source | COB + Fresnel + Mask | |
| Light Intensity | ≥4000μW/cm² | |
| Material Compatibility | All Anycubic Resins | |
| System & Mechanical Design | Build Platform | Precision-ground Steel Platform |
| Z Axis | Dual linear guide rails + Ball lead screws | |
| Release Film | NFEP | |
| Resin Vat | 1.9L | |
| Machine Leveling | Leveling-Free 3.0 + Leveling Feedback + Leveling Self-Check | |
| Power Loss Resume | Supported | |
| Power Supply | 296W | |
| Protection Film | Wave Release Film | |
| Resin Auto Fill Unit | Not Supported | |
| Dynamic Temperature Control Resin Vat | Supported | |
| Slicing Software | Photon Workshop( + Chitubox/Lychee/Tango) | |
| Experience & Features | Hinged Cover | Smooth Hinge (>45° stepless) |
| Operating Screen | 4.5" Resistive Touchscreen | |
| Air Purifier | Optional AirPure 2.0 | |
| Lcd Screen | 14" Monochrome LCD (12K) | |
| Anycubic App | Supported | |
| Multilingual Support | EN / CN / DE / FR / IT / ES / RU / JP / PT / KR | |
| Machine Weight | 23.1kg | |
| Package Weight | 28.8kg | |
| Product Dimensions | 430*414*625mm³ | |
| Packaging Dimensions | 745*510*528mm³ | |
Customer Reviews
rate_review
No reviews yet
Be the first to share your experience!
Frequently Asked Questions
How do I get warranty & technical support?
All products sold by Blanc include 1-year official hardware warranty and lifetime technical assistance via our support ticket portal.
What is the shipping time within Nepal?
Orders inside Kathmandu Valley are delivered within 24 hours. Outside valley orders take 2-3 business days via express courier.
Is assembly required upon unboxing?
Printers and accessories arrive pre-calibrated or semi-assembled with clear quick-start guides for 15-minute setup.