Bambu Lab A2L
FDM 3D Printers
Bambu Lab A2L Combo
rate_review Be the first to review
NPR
0
alarm
Promo Ends In: 00:00:00
In Stock
(1 available)
Quantity
compare_arrows
Compare with FDM 3D Printers
1
Creative Playground.
Extra Large.
Why choose Bambu Lab A2L
Extra Large Build Volume
Oversized build in one go.
Multi-Color Printing
The most reliable multi-color solution.
Full-Auto Calibration
You don't have to do ANY manual tuning..
Modular Add-Ons
Blade cutting, pen drawing and more.
MakerWorld Ecosystem
Millions of models, one-click away.
Intelligent Monitoring
AutoPilot your printing process.
Top Creators ｜ 2M+ Models｜One Click Away.
Printing Is a Blast When There's Always Something New on the Menu
Oversized Build Volume
Extra Large Volume for Extra Bold Ideas
330 × 320 × 325 mm. That's 105% more space than the 256 mm class. A full-scale helmet, in one piece. A batch of 40 fidget toys, in one run. The kind of project that used to mean slicing your model into chunks—or starting over when the seams didn't line up—now just fits.
Modular Add-ons
Add a New Dimension with Blade Cutting
Swap the toolhead cover for the cutting module, and the A2L isn't just a printer anymore—it cuts. Stickers, leather, fabric, paper. Custom livery for your model plane? Done. A leather wrap for the handle of your Excalibur? Done.
Alignment by Smart Phone
Decal Cutting
Pen Drawing
Engineered for Stability
A Bed-Slinger As Stable As CoreXY
Granular Damper
Software handles the vibration it can predict. Hardware handles the rest. Inside the A2L's gantry sit two Granular Dampers—sealed chambers packed with fine particles that dissipate vibration through countless micro-collisions. It's a damping technique borrowed from aerospace and precision machinery, rarely seen in desktop 3D printers. The result: surface ripples and ghost lines stay out of your prints, even at full build height.
Automatic Material System
Multi-Color Made Easy
Multi-color printing isn't new. Doing it thousands times in a row, without a single jam, is. That's the bar AMS lite is built to clear. Over a million users worldwide have put it through long, color-heavy prints—the kind where one bad swap ruins twelve hours of work—and it keeps swapping.
Support 2nd-Gen AMS
Pair the A2L with the 2nd-Gen AMS, and your filament gets a sealed, climate-controlled home—dried on demand before each print, kept airtight between them. Need more colors? Need different material types running side by side? AMS lite and the 2nd-Gen AMS share the same embedded buffer system, so you can stack and mix them: four spools, eight spools, sixteen spools—whatever your project asks for, fed cleanly through one queue.
19-Color Printing ｜ Filament Drying｜Enclosed Storage
Intelligent Print Monitoring
Put Your Printing on Autopilot
Most print failures happen quietly—the nozzle keeps moving, but the part stopped forming hours ago. Sensors along the extrusion path, paired with the PMSM extruder as a feedback node, feed a Bambu-trained algorithm that catches filament tangle, runout, nozzle clumping, and air printing—then pauses A2L and guides you through the fix on Bambu Handy.
Auto Flow Dynamics Calibration
Repeatable Sharp Print Details
Most printers calibrate flow once and trust it for every print after. A2L recalibrates every time. Before each job, Flow Dynamics Calibration measures how filament actually flows through this nozzle, with this spool, today—and builds a nonlinear model of the entire extrusion path. Nozzle wear, filament moisture, a fresh roll—all factored in before the first layer goes down. Sharp corners. Clean details. Print after print.
UL Clean Air Certified
Print with Confidence, Breathe with Peace of Mind
The A2L is certified under the UL 2904 standard for 3D printing indoor air quality when used with official filaments. Testing with our core lineup—including Bambu PLA Basic, PLA Pure, and PETG Basic—confirms ultra-low emissions, making the A2L safe for indoor use.
Engineered for Silence
Print Quietly. Work Comfortably.
The A2L uses active motor noise cancellation, precision linear rails, and intelligent fan scaling to deliver a seamless experience. In Silent Mode, it operates at just 49dB—as peaceful as a quiet library.
Connectivity & Privacy
Connect Your Way
Your printer, your privacy. Use Bambu Cloud for effortless cross-device connectivity, or switch to LAN-only mode for a secure, local-network experience. Total control over how you connect.
Unboxing Video
What's in the box
A2L
Tool Box
Build Plate
Spool Holder
AMS lite (Combo version)
Technical Specifications
Detailed hardware & material parameters
| Item | Specification | |
|---|---|---|
| General | Brand | BAMBU LAB |
| Category | FDM 3D Printers | |
| Body | Build Volume (W*D*H) | 330mm*320mm*325 mm |
| Chassis | Aluminum and Steel | |
| Outer Frame | Plastic | |
| Dimensions And Weight | Physical Dimensions | 544mm*529mm*505 mm |
| Net Weight | 12.8 kg (Gross Weight: A2L AMS Combo 18.9kg) | |
| Toolhead | Extruder Gear | Hardened Steel |
| Nozzle | Stainless Steel | |
| Max Nozzle Temperature | 300 °C | |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm | |
| Filament Cutter | Built-in | |
| Filament Diameter | 1.75 mm | |
| Extruder Motor | Servo Extruder Motor | |
| Heatbed | Build Plate Material | Flexible Steel Plate |
| Included Build Plate Type | Textured PEI Plate | |
| Supported Build Plate Type | Textured PEI plate, Engineering Plate, Cool Plate SuperTack | |
| Max Heatbed Temperature | 80 ℃ | |
Customer Reviews
rate_review
No reviews yet
Be the first to share your experience!
Frequently Asked Questions
How do I get warranty & technical support?
All products sold by Blanc include 1-year official hardware warranty and lifetime technical assistance via our support ticket portal.
What is the shipping time within Nepal?
Orders inside Kathmandu Valley are delivered within 24 hours. Outside valley orders take 2-3 business days via express courier.
Is assembly required upon unboxing?
Printers and accessories arrive pre-calibrated or semi-assembled with clear quick-start guides for 15-minute setup.